EasyManua.ls Logo

Huawei quidway s7700 - Page 356

Huawei quidway s7700
648 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Set the registration mode of interfaces.
Data Preparation
To complete the configuration, you need the following data:
l VLANs allowed by interfaces of Switch A, Switch B, and Switch C: all VLANs
l Registration mode of interfaces of Switch A and Switch B: normal
l Registration modes of GE 1/0/1 and GE 1/0/2 of Switch C: fixed and normal respectively
l VLANS of company B on Switch C: VLAN 101 to VLAN 200
Procedure
Step 1 Configure Switch A.
# Enable GVRP globally.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] gvrp
# Set the link type of GE 1/0/1 and GE 1/0/2 to trunk and configure the interfaces to allow all
VLANs.
[SwitchA] interface gigabitethernet 1/0/1
[SwitchA-GigabitEthernet1/0/1] port link-type trunk
[SwitchA-GigabitEthernet1/0/1] port trunk allow-pass vlan all
[SwitchA-GigabitEthernet1/0/1] quit
[SwitchA] interface gigabitethernet 1/0/2
[SwitchA-GigabitEthernet1/0/2] port link-type trunk
[SwitchA-GigabitEthernet1/0/2] port trunk allow-pass vlan all
[SwitchA-GigabitEthernet1/0/2] quit
# Enable GVRP on the interfaces and set the registration modes of the interfaces.
[SwitchA] interface gigabitethernet 1/0/1
[SwitchA-GigabitEthernet1/0/1] gvrp
[SwitchA-GigabitEthernet1/0/1] gvrp registration normal
[SwitchA-GigabitEthernet1/0/1] quit
[SwitchA] interface gigabitethernet 1/0/2
[SwitchA-GigabitEthernet1/0/2] gvrp
[SwitchA-GigabitEthernet1/0/2] gvrp registration normal
[SwitchA-GigabitEthernet1/0/2] quit
The configuration of Switch B is similar to the configuration of Switch A, and is not mentioned
here.
Step 2 Configure Switch C.
# Create VLAN 101 to VLAN 200.
<Quidway> system-view
[Quidway] sysname SwitchC
[SwitchC] vlan batch 101 to 200
# Enable GVRP globally.
[SwitchC] gvrp
# Set the link type of GE 1/0/1 and GE 1/0/2 to trunk and configure the interfaces to allow all
VLANs.
[SwitchC] interface gigabitethernet 1/0/1
[SwitchC-GigabitEthernet1/0/1] port link-type trunk
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 6 GVRP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
339

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals