Huawei quidway s7700 - Page 68

[SwitchA] display eth-trunk 1
Eth-Trunk1's state information is:
Local:
LAG ID: 1 WorkingMode: STATIC
Preempt Delay: Disabled Hash arithmetic: According to SIP-XOR-DIP
System Priority: 100 System ID: 00e0-fca8-0417
Least Active-linknumber: 1 Max Active-linknumber: 2
Operate status: Up Number Of Up Port In Trunk: 2
------------------------------------------------------------------------------
ActorPortName Status PortType PortPri PortNo PortKey PortState
Weight
GigabitEthernet1/0/1 Selected 1GE 100 6145 2865 11111100
1
GigabitEthernet1/0/2 Selected 1GE 100 6146 2865 11111100
1
GigabitEthernet1/0/3 Unselect 1GE 32768 6147 2865 11100000
1
Partner:
------------------------------------------------------------------------------
PartnerPortName SysPri SystemID PortPri PortNo PortKey PortState
GigabitEthernet1/0/1 32768 00e0-fca6-7f85 32768 6145 2609 11111100
GigabitEthernet1/0/2 32768 00e0-fca6-7f85 32768 6146 2609 11111100
GigabitEthernet1/0/3 32768 00e0-fca6-7f85 32768 6147 2609 11110000
[SwitchB] display eth-trunk 1
Eth-Trunk1's state information is:
Local:
LAG ID: 1 WorkingMode: STATIC
Preempt Delay: Disabled Hash arithmetic: According to SIP-XOR-DIP
System Priority: 32768 System ID: 00e0-fca6-7f85
Least Active-linknumber: 1 Max Active-linknumber: 8
Operate status: Up Number Of Up Port In Trunk: 2
------------------------------------------------------------------------------
ActorPortName Status PortType PortPri PortNo PortKey PortState
Weight
GigabitEthernet1/0/1 Selected 1GE 32768 6145 2609 11111100
1
GigabitEthernet1/0/2 Selected 1GE 32768 6146 2609 11111100
1
GigabitEthernet1/0/3 Unselect 1GE 32768 6147 2609 11100000
1
Partner:
------------------------------------------------------------------------------
PartnerPortName SysPri SystemID PortPri PortNo PortKey
PortState
GigabitEthernet1/0/1 100 00e0-fca8-0417 100 6145 2865
11111100
GigabitEthernet1/0/2 100 00e0-fca8-0417 100 6146 2865
11111100
GigabitEthernet1/0/3 100 00e0-fca8-0417 32768 6147 2865
11110000
The preceding information shows that the system priority of SwitchA is 100 and it is higher than
the system priority of SwitchB. Member interfaces GE1/0/1 and GE1/0/2 become the active
interfaces and are in Selected state. Interface GE1/0/3 is in Unselect state. M active links work
in load balancing mode and N links are the backup links.
----End
Configuration Files
l Configuration file of SwitchA
#
sysname SwitchA
#
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 2 Link Aggregation Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
51