EasyManua.ls Logo

Huawei quidway s7700 - Page 391

Huawei quidway s7700
833 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.3.3.9 4 100 3 3 0 00:02:19 Established 0
You can see that a VPNv6 peer relation is established between PE1 and PE2.
Step 7 Configure BGP4+ on PE1 and CE1.
# Configure EBGP on PE1.
[PE1] bgp 100
[PE1-bgp] ipv6-family vpn6-instance vpna
[PE1-bgp6-vpna] peer 2001::1 as-number 65410
[PE1-bgp6-vpna] import-route direct
[PE1-bgp6-vpna] quit
[PE1-bgp] quit
# Configure EBGP on CE1.
[CE1] bgp 65410
[CE1-bgp] router-id 10.10.10.10
[CE1-bgp] peer 2001::2 as-number 100
[CE1-bgp] ipv6-family unicast
[CE1-bgp-af-ipv6] peer 2001::2 enable
[CE1-bgp-af-ipv6] import-route direct
[CE1-bgp-af-ipv6] quit
[CE1-bgp] quit
After the preceding configurations are complete, run the display bgp vpnv6 vpn6-instance
vpnv6-instance-name peer command on PE1 to view the status of the peer relation.
[PE1] display bgp vpnv6 vpn6-instance vpna peer
BGP local router ID : 1.1.1.9
Local AS number : 100
Total number of peers : 1 Peers in established state : 1
Peer V AS MsgRcvd MsgSent OutQ Up/Down State PrefRcv
2001::1 4 65410 10 9 0 00:06:10 Established 1
You can also run the display bgp ipv6 peer command on CE1 to view the status of the peer
relation.
[CE1] display bgp ipv6 peer
BGP local router ID : 10.10.10.10
Local AS number : 65410
Total number of peers : 1 Peers in established state : 1
Peer V AS MsgRcvd MsgSent OutQ Up/Down State PrefRcv
2001::2 4 100 2 3 0 00:00:32 Established 0
You can see that the EBGP connection is established between PE1 and CE1.
Step 8 Configure a static route between PE1 and CE2.
# Configure an IPv6 static route for the VPNv6 instance vpnb on PE1.
[PE1] ipv6 route-static vpn6-instance vpnb 1998:: 64 2003::1
# Import the static route and directly connected route to BGP on PE1.
[PE1] bgp 100
[PE1-bgp] ipv6-family vpn6-instance vpnb
[PE1-bgp6-vpnb] import-route static
[PE1-bgp6-vpnb] import-route direct
[PE1-bgp6-vpnb] quit
[PE1-bgp] quit
# Configure the IPv6 default route on CE2.
[CE2] ipv6 route-static :: 0 2003::2
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 4 BGP MPLS IPv6 VPN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
376

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals