Huawei quidway s7700 - Page 393

[PE1] ping ipv6 vpn6-instance vpna 1999::1
PING 1999::1 : 56 data bytes, press CTRL_C to break
Reply from 1999::1
bytes=56 Sequence=1 hop limit=63 time = 94 ms
Reply from 1999::1
bytes=56 Sequence=2 hop limit=63 time = 94 ms
Reply from 1999::1
bytes=56 Sequence=3 hop limit=63 time = 94 ms
Reply from 1999::1
bytes=56 Sequence=4 hop limit=63 time = 94 ms
Reply from 1999::1
bytes=56 Sequence=5 hop limit=63 time = 94 ms
--- 1999::1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 94/94/94 ms
[CE1] tracert ipv6 1999::1
traceroute to 1999::1 30 hops max,60 bytes packet
1 2001::2 62 ms 31 ms 32 ms
2 2004::2 101 ms 94 ms 98 ms
3 1999::1 156 ms 157 ms 171 ms
The address 1999::1/64 also exists on CE4. Therefore, when you run the display ipv6
statistics command on CE3 and CE4 to check the change of the number of sent and received
ICMPv6 packets, you can find that the packets are sent to the correct interface. The sites that
are not allowed to communicate with each other are separated.
----End
Configuration Files
l Configuration file of PE1
#
sysname PE1
#
ipv6
#
vlan batch 10 100 101
#
ipv6 vpn6-instance vpna
route-distinguisher 100:1
vpn-target 22:22 export-extcommunity
vpn-target 33:33 import-extcommunity
#
ipv6 vpn6-instance vpnb
route-distinguisher 200:1
vpn-target 44:44 export-extcommunity
vpn-target 55:55 import-extcommunity
#
mpls lsr-id 1.1.1.9
mpls
#
mpls ldp
#
isis 1
network-entity 10.1111.1111.1111.00
#
interface Vlanif 100
ipv6 enable
ipv6 binding vpn6-instance vpna
ipv6 address 2001::2/64
#
interface Vlanif101
ipv6 enable
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 4 BGP MPLS IPv6 VPN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
378