------------------------------------------------------------------------------
PeerID Status LAM SsnRole SsnAge KASent/Rcv
------------------------------------------------------------------------------
3.3.3.9:0 Operational DU Passive 0000:00:06 26/26
------------------------------------------------------------------------------
TOTAL: 1 session(s) Found.
Step 7 Configure a tunnel policy.
# Configure PE1.
[PE1] tunnel-policy policy1
[PE1-tunnel-policy-policy1] tunnel binding destination 3.3.3.9 te tunnel 1/0/0
[PE1-tunnel-policy-policy1] quit
# Configure PE2.
[PE2] tunnel-policy policy1
[PE2-tunnel-policy-policy1] tunnel binding destination 1.1.1.9 te tunnel 1/0/0
[PE2-tunnel-policy-policy1] quit
Step 8 Enable MPLS L2VPN on PEs.
# Configure PE1.
[PE1] mpls l2vpn
# Configure PE2.
[PE2] mpls l2vpn
Step 9 Create VSIs on PEs and configure a tunnel policy.
# Configure PE1.
[PE1] vsi a2 static
[PE1-vsi-a2] pwsignal ldp
[PE1-vsi-a2-ldp] vsi-id 2
[PE1-vsi-a2-ldp] peer 3.3.3.9 tnl-policy policy1
[PE1-vsi-a2-ldp] quit
# Configure PE2.
[PE2] vsi a2 static
[PE2-vsi-a2] pwsignal ldp
[PE2-vsi-a2-ldp] vsi-id 2
[PE2-vsi-a2-ldp] peer 1.1.1.9 tnl-policy policy1
[PE2-vsi-a2-ldp] quit
Step 10 Bind VSIs to interfaces on PEs.
# Configure PE1.
[PE1] interface vlanif 10
[PE1-Vlanif10] l2 binding vsi a2
[PE1-Vlanif10] quit
# Configure PE2.
[PE2] interface vlanif 40
[PE2-Vlanif40] l2 binding vsi a2
[PE2-Vlanif40] quit
# Configure CE1.
[CE1] interface vlanif 10
[CE1-Vlanif10] ip address 10.1.1.1 255.255.255.0
[CE1-Vlanif10] quit
# Configure CE2.
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 7 VPLS Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
748
To Next Page
Loading...
