Huawei Quidway S8500 Series - Page 208

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 3 ARP Table Size Configuration Commands
Huawei Technologies Proprietary
3-4
View
Any view
Parameter
None
Description
Use the display arp max-entry command to display the current maximum numbers of
ARP entries and the intending counterparts that will take effect after the switch restarts
next time.
Example
# Display the current maximum numbers of ARP entries and the intending counterparts
that will take effect after the switch restarts next time.
<Quidway> display arp max-entry
The current max arp entry config information:
max arp entry config(Main Board): 65536
max link aggregation arp entry config: 0
max arp entry config of slot 0: 8192
……………
max arp entry config of slot 13: 8192
The next max arp entry config information:
max arp entry config(Main Board): 65536
max link aggregation arp entry config: 8192
max arp entry config of slot 0: 8192
………….
max arp entry config of slot 13: 8192