Huawei Quidway S9300 - Interfaces; Interface Attributes; Table 5-121 Types and Functions of the Interfaces on the X4 UX; Table 5-122 Attributes of the 10 G Base-XFP Optical Interface

Indicator/Button Color Description
Red If the indicator is in red, it indicates that the
LPU is faulty.
Orange If the indicator is in orange, it indicates that
the LPU is installed, and the board is powered
on.
ACT Amber If the indicator blinks, the data is being
transmitted or received.
LINK Green-yellow If the indicator is on, it indicates that the link
is connected.
5.21.4 Interfaces
Table 5-121 describes the types and functions of the interfaces on the X4UX.
Table 5-121 Types and functions of the interfaces on the X4UX
Name
Quantity Description
10G BASE-X optical
interface
4 The X4UX provides four 10GE BASE-X
optical interfaces to transmit and receive 10
Gbit/s Ethernet services.
5.21.5 Interface Attributes
The X4UX has only the data interfaces. Each interface has an optical module. Table 5-122 and
Table 5-123 show the attributes of the interfaces and the optical modules on the X4UX.
Table 5-122 Attributes of the 10G Base-XFP optical interface
Attribute
Description
Connector type LC/PC
Optical interface
attribute
Depending on the XFP optical module. For details about the attributes of
the optical module, see Table 5-123.
Compliance
standard
IEEE 802.3ae
Frame format Ethernet_II, Ethernet_SAP, or Ethernet_SNAP
Network protocol IP
5 Boards
Quidway S9300 Terabit Routing Switch
Hardware Description
5-94 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 01 (2010-12-15)