6.2.1 Introduction
The power cables of the S9300 consist of the power cables in the cabinet and power cables out
of the cabinet. The external power cables connect the power distribution cabinet to the power
distribution box, and then the internal power cables connect the power distribution box to the
S9300 in the cabinet.
Each internal or external AC power cable consists of the live wire, neutral wire, and grounding
cable.
6.2.2 Structure
Figure 6-2 shows the appearance of the internal AC power cables.
Figure 6-2 Appearance of the internal AC power cables
The terminals of the external AC power cables are determined according to the site survey.
6.2.3 Technical Specifications
Table 6-3 and Table 6-4 show the technical specifications of the AC power cables of the
S9300.
Table 6-3 Technical specifications of the AC power cables in the cabinet
Item
Description
Power cable Electronic and electrical cable-300 V-IEC 53(RVV)-1 mm^2-1.0
mm^2-Black-10 A-Three core-OEM
Terminal Bare crimping terminal-Single-line cord end terminal-1 mm^2-5 A-
Tin plating-Insert depth 6 mm-Yellow
Quidway S9300 Terabit Routing Switch
Hardware Description 6 Cables
Issue 01 (2010-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-5
To Next Page
Loading...
