Huawei Quidway S9300 - 5 Ping and Tracert

Table 9-3 Attributes of the SFP+ optical module (10 Gbit/s)
Attribute Description
Transmission
distance
300 m 10 km 40 km
Center
wavelength
850 nm 1310 nm 1550 nm
Transmitting
power
-7.3 dBm to -1 dBm -8.2 dBm to 0.5 dBm -4.7 dBm to 4.0 dBm
Receiver
sensitivity
-11.1 dBm -12.6 dBm -14.1 dBm
Overload
optical power
-1.0 dBm 0.5 dBm -1.0 dBm
Extinction ratio 3 dB 3.5 dB 3 dB
Fiber type Multi-mode Single-mode
Table 9-4 Attributes of the XFP optical module (10 Gbit/s)
Attribute
Description
Transmissio
n distance
300 m 10 km 40 km 80 km
Center
wavelength
850 nm 1310 nm 1550 nm 1550 nm
Transmittin
g power
-7.3 dBm to -1.3
dBm
-6.0 dBm to -1.0
dBm
-1.0 dBm to 2.0
dBm
0 dBm to 4 dBm
Receiver
sensitivity
-7.5 dBm -11.0 dBm -15.0 dBm -24.0 dBm
Overload
optical
power
-1.0 dBm 0.5 dBm -1.0 dBm -7.0 dBm
Fiber type Multi-mode Single-mode
9.3 GE Optical Interface Attributes
This section describes the attributes of GE optical interfaces.
Each interface of the GE optical LPU has an optical module. Table 9-5, Table 9-6 and Table
9-7 show the attributes of the interface and the optical module.
Quidway S9300 Terabit Routing Switch
Hardware Description 9 List of Interface Attributes
Issue 01 (2010-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-3