Table 2-5 Nixie tube description
Display Description
Output voltage ● No decimal places. The precision is 1 V when the
voltage ranges from 0 V to 999 V. There is no precision
requirement when the voltage is greater than 999 V.
The minimum displayed value is 000 V and the
maximum displayed value is 999 V.
● Parameters can be set using buttons only in the setting
mode but the settings are not saved upon power
failure.
Output current ● The last digit is a decimal with the precision of 0.1 A.
The minimum displayed value is 00.0 A and the
maximum displayed value is 99.9 A.
● Parameters can be set using buttons only in the setting
mode but the settings are not saved upon power
failure.
Hardware address ● Adr is displayed by default. Hold down the button to
enter the address display screen (static).
● On the setting screen (blinking), ip the rst digit to
enter the CCC screen. The default hardware address
127 (decimal) can be restored.
● After the hardware address is
modied, the group
number is restored to the default value.
● Parameters can be set using buttons and the settings
are saved upon power failure.
Group number ● GrP is displayed by default. Hold down the button to
enter the group number display screen (static).
● The group number is displayed in decimal format.
● Parameters can be set only under the company
protocol. Setting is not supported under third-party
protocol.
● Parameters can be set using buttons and the settings
are saved upon power failure.
Error code ● The high-order nixie tube displays E, and the middle-
and low-order nixie tubes display digits.
● Parameters cannot be set using buttons.
Startup/Shutdown ● on: startup; oFF: shutdown
● Parameters can be set using buttons only in the setting
mode but the settings are not saved upon power
failure.
Software version ● The value is displayed as digits.
● Parameters cannot be set using buttons.
R100030G1 Charging Module
User Manual 2 Product Description
Issue 05 (2021-11-16) Copyright © Huawei Digital Power Technologies Co., Ltd. 12
To Next Page
Loading...
