● Follow the specied procedures for installation, operation, and maintenance.
● Before handling a conductor or terminal, measure the contact point voltage
with a multimeter and ensure that there is no risk of electric shock.
● Ensure that all slots are installed with boards or
ller panels. Avoid exposure
of hazardous voltages or energy on boards. Ensure that the air channel is
normal, control electromagnetic interference, and prevent dust and other
foreign matter on the backplane, baseplate, and boards.
● After installing the equipment, remove the packing materials such as cartons,
foam, plastics, and cable ties from the equipment area.
● In the case of a
re, immediately leave the building or the equipment area
and activate the re alarm or call emergency services. Do not re-enter the
building or
aected area until it has been deemed safe by qualied
professionals.
● Do not stop protective devices. Pay attention to the warnings, cautions, and
precautionary measures in this document and on the nameplates. Promptly
replace warning labels that have worn out.
● Keep irrelevant people far away from the equipment.
● Use insulated tools or tools with insulated handles.
Personnel Requirements
● Personnel who plan to install, operate, or maintain the equipment need to
receive thorough training, understand all necessary safety precautions, and be
able to correctly perform all operations.
● Only
qualied professionals and trained personnel are allowed to install,
operate, and maintain the equipment.
● Only
qualied professionals are allowed to remove safety facilities and inspect
the equipment.
● Personnel who will operate the equipment, including operators, trained
personnel, and professionals, should possess the local national required
qualications in special operations such as high-voltage operations, working
at heights, and operations of special equipment.
R100030G1 Charging Module
User Manual 1 Safety Precautions
Issue 05 (2021-11-16) Copyright © Huawei Digital Power Technologies Co., Ltd. 3
To Next Page
Loading...
