Huawei RH2288H V3 - Page 147

Figure 5-12 Security
14. Select Set Supervisor Password and press Enter. Set a login password for the
super administrator.
Before changing the supervisor password, you need to enter the current
supervisor password. The server is locked after three consecutive failures with
wrong passwords. Restart the server to unlock it.
NO TE
Set the supervisor password that meets the following requirements:
● The default BIOS password is Huawei12#$ for the American keyboard,
Huqzei&é34 for the French keyboard, and Huawei12£$ for the English keyboard.
When entering the BIOS password on the Remote Virtual Console:
● If the keyboard type
congured in the OS is the same as the actual keyboard type,
enter the password by using the actual keyboard.
● If the keyboard type congured in the OS is dierent from the actual keyboard
type, enter the password by using the keyboard congured in the OS.
● The supervisor password must be a string of 8 to 16 characters, including special
characters (including spaces) and at least two types of the following characters:
uppercase letters, lowercase letters, and digits.
● A new password cannot be the same as one of the previous
ve passwords.
After the supervisor password is set, the following menu items are displayed:
● Clear Supervisor Password
● Power on Password
Select a language.
15. To change the language, select the Main tab to go to the Main screen, as
shown in Figure 5-13.
RH2288H V3 Server
User Guide 5 Conguring the RH2288H V3
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 134