Huawei RH2288H V3 - Page 153

e. Enter a BIOS password as prompted. The screen for setting the BIOS is
displayed.
f. Choose Advanced > IPMI iBMC Conguration and press Enter.
The IPMI iBMC Conguration screen is displayed.
g. Select iBMC Conguration and press Enter.
The iBMC
Conguration screen is displayed, showing information about
the IP address of the iBMC network port. See Figure 5-19.
Figure 5-19 iBMC Conguration
h. Select IP Address in IPV4 Conguration and press Enter. On the
conguration screen, set the IPv4 address of the iBMC management
network port, as shown in Figure 5-20.
RH2288H V3 Server
User Guide 5 Conguring the RH2288H V3
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 140