Drive Position Panel Silkscreen Slot ID in SEL
0 to 11 disk0 to disk11
0 to 23 disk0 to disk23
0 to 24 disk0 to disk24
Rear drives HDD A0, HDD B0, HDD
A1, and HDD B1
diskA, diskB, diskC, and
diskD
For the mapping between drive silkscreens and physical slots, see 2.2 Appearance.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 If the server is equipped with a front bezel, remove the bezel before removing the
front drives. For details, see 7.3 (Optional) Removing the Front Bezel.
Step 4 Determine the position of the drive (for example, a front drive) on the RH2288H
V3. See Figure 7-7.
Figure 7-7 Drive position
Step 5 Push the ejector release button on the drive. See (1) in Figure 7-8.
The ejector lever automatically ejects.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 155
To Next Page
Loading...
