Figure 7-25 Installing the supercapacitor tray
Step 6 Install full-height full-length riser cards if they are required. For details, see 7.20
Installing a Riser Card.
Step 7 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 8 Install the RH2288H V3. For details, see 3.4 Installing the Server.
Step 9 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 10 Power on the RH2288H V3. For details, see 4.1 Powering On the Server.
----End
7.15 Removing a Fan Module
Remove a fan module before replacing it with a new one or removing other
components (such as the mainboard and DVD-ROM drive).
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 170
To Next Page
Loading...
