7.21.2 Removing a PCIe Card from the Mainboard
Remove a non-hot-swappable PCIe card before replacing it with a new one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 Power
o the RH2288H V3. For details, see 4.2 Powering O the Server.
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288H V3 and put it on an ESD desktop. For details, see 3.6
Removing the Server.
Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 7 Open the PCIe card latch. See step (1) in Figure 7-39.
Figure 7-39 Removing a PCIe card from the mainboard
Step 8 Lift the PCIe card slowly out of the slot. See step (2) in Figure 7-39.
Step 9 Place the removed PCIe card in an ESD bag.
----End
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 182
To Next Page
Loading...
