Huawei RH2288H V3 - Installing an SD Card

Figure 7-129 Removing an SD card
Step 11 Remove the SD card. See (2) in Figure 7-129.
Step 12 Place the removed SD card in an ESD bag.
----End
7.52 Installing an SD Card
Install an SD card if an SD card has failed or needs to be replaced with a new
model.
Install SD cards based on actual situation. Back up important data on the SD card
before replacing it.
● If the server is not installed with SD cards, install SD cards when the server is
powered
o.
● If the server is congured with only one SD card, replace the SD card board
with the spare part (BOM: 02311JDU). If the SD card is installed with the OS,
install the OS on the newly installed SD card.
● If the server is congured with two SD cards and only one SD card needs to
be replaced, replace the SD card with the spare part (BOM: 06010304).
● If the server is
congured with two SD cards and both of them need to be
replaced, replace the SD cards and the SD card board with the spare part
(BOM: 02311JDV). If the original server OS is installed on an SD card, install
the OS on the newly installed SD card.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 263