Step 5 Remove the RH2288H V3 and put it on an ESD desktop. For details, see 3.6
Removing the Server.
Step 6 Determine the position of the right mounting ear on the RH2288H V3. See Figure
7-162.
Figure 7-162 Position of the right mounting ear
Step 7 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 8 Remove full-height full-length riser cards if they are installed. For details, see 7.19
Removing the Riser Card.
Step 9 Remove the air duct. For details, see 7.13 Removing the Air Duct.
Step 10 Remove all fan modules. For details, see 7.15 Removing a Fan Module.
Step 11 Press and hold down the latches on both sides of a fan module bracket, and lift
the bracket. Use the same method to lift the other fan module bracket. See steps
(1) and (2) in Figure 7-163.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 293
To Next Page
Loading...
