Figure 5-3 Hot swap of a memory board
The system starts to migrate data, and the progress bar displays the
migration progress. When the migration progress reaches 100%, the
migration is complete and the faulty memory board powers
o.
3. Press the button on the faulty memory board to migrate data to a spare
memory board.
– If data migration is in progress, the memory board status indicator is
steady on and the ATTN indicator on the memory board is blinking.
– If you press the memory board button again within 5 seconds, the data
migration is canceled. In this situation, the memory board status indicator
is steady on and the ATTN indicator is
o.
– If you do not press the memory board button again within 5 seconds, the
data migration starts. In this situation, the memory board status indicator
is blinking and the ATTN indicator is
o.
– When the data migration is complete, the faulty memory board powers
o. In this situation, the memory board status indicator and the ATTN
indicator are both
o. The memory board is removable.
– If the data migration fails, the faulty memory board does not power o.
In this situation, the memory board status indicator and the ATTN
indicator are both steady on. The memory board is not removable.
Step 3 When both the memory board ATTN indicator and the memory board button/
status indicator are
o, press the button on the memory board. See step (1) in
Figure 5-4.
The ejector lever automatically ejects.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 114
To Next Page
Loading...
