Spare DVD drive
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Take the spare DVD drive out of its ESD bag.
Step 3 Install the DVD drive in the DVD drive+LCD module. See step (1) in Figure 5-25.
Step 4 Connect the cable to the DVD drive. See step (2) in Figure 5-25.
Figure 5-25 Installing a DVD drive
Description BOM Number
Cable for connecting the DVD drive to the DVD
drive+LCD module
04050603
Step 5 Install the cover of the DVD drive+LCD module in the arrow direction. See steps
(1) and (2) in Figure 5-26.
Step 6 Tighten the screw on the DVD drive+LCD module using a Phillips screwdriver. See
step (3) in Figure 5-26.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 139
To Next Page
Loading...
