Huawei RH8100 V3 - Installing a Hard Disk Backplane

Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Loosen the screws on the hard disk backplane. See step (1) in Figure 5-61.
Figure 5-61 Removing a hard disk backplane
Step 3 Pull out the captive screws of the ejector levers on both sides of the backplane,
and rotate the ejector levels in the arrow direction. See steps (2) and (3) in Figure
5-61.
Step 4 Remove the hard disk backplane in the arrow direction. See step (4) in Figure
5-61.
Step 5 Place the removed hard disk backplane in an ESD bag.
----End
5.5.16 Installing a Hard Disk Backplane
This topic describes how to install a hard disk backplane.
Scenarios
Install a hard disk backplane if the original one has failed.
Prerequisites
Conditions
● You have powered
o the RH8100 V3. For details, see 6.2 Powering O the
RH8100 V3.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 177