Step 6 Tighten the screws on the hard disk enclosure. See step (4) in Figure 5-83.
Step 7 Push the hard disk enclosure into the front I/O module. See step (1) in Figure
5-84.
Figure 5-84 Installing a hard disk enclosure
Step 8 Lower the ejector lever of the hard disk enclosure. See step (2) in Figure 5-84.
----End
5.6.11 Removing a Hard Disk Backplane
This topic describes how to remove a hard disk backplane.
Scenarios
Remove a hard disk backplane when it is faulty and needs to be replaced.
Prerequisites
Conditions
● You have powered
o the RH8100 V3. For details, see 6.2 Powering O the
RH8100 V3. Then you have removed all power cables from the server.
● You have removed the hard disk indicator panel. For details, see 5.6.9
Removing a Hard Disk Indicator Panel.
Data
● You have obtained the cabinet number and chassis number of the RH8100 V3.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 201
To Next Page
Loading...
