Figure 5-98 Cable connections (1)
No. Description BOM Number
1 Signal cable for connecting the hard disk
backplane to the front I/O module
04051010
2 SAS HD cable (Port A-Port A) for connecting
the hard disk backplane to the RAID controller
card
04050905
3 SAS HD cable (Port B-Port B) for connecting
the hard disk backplane to the RAID controller
card
04050905
If the RH8100 V3 is congured with two RAID controller cards, the cable
connections between the RAID controller cards and the hard disk backplane are
shown in Figure 5-99.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 216
To Next Page
Loading...
