● You have obtained the cabinet number and chassis number of the RH8100 V3.
● You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
● You have determined the position on the RH8100 V3 for removing a NIC.
Tools
● ESD gloves
● Packaging materials, for example, an ESD bag
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Hold down the blue button above the NIC. See step (1) in Figure 5-143.
Step 3 Remove the NIC from the slot. See step (2) in Figure 5-143.
Figure 5-143 Removing a NIC
Step 4 Place the removed NIC in an ESD bag.
----End
5.10.6 Installing a NIC
This topic describes how to install a network interface card (NIC).
Scenarios
Install a NIC if:
● A NIC has failed.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 270
To Next Page
Loading...
