Huawei RH8100 V3 - Installing a Rear I;O Module

Figure 5-149 Removing a rear I/O module
Step 6 Remove all PCIe cards from the rear I/O module, and place the rear I/O module in
an ESD bag.
----End
5.11.2 Installing a Rear I/O Module
This topic describes how to install a rear I/O module when you replace the original
one or replace a non-hot-swappable PCIe card on the rear I/O module.
Scenarios
Install a rear I/O module if:
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 280