Huawei RH8100 V3 - Page 319

Figure 7-1 Initial conguration owchart
Table 7-2 describes the initial conguration process.
Table 7-2 Initial conguration process
Step
Description
Check the RH8100 V3. After logging in to the iBMC WebUI:
● Check that the RH8100 V3 version information
is correct.
● Check that no alarm is generated for the
RH8100 V3.
Change an iBMC user
password.
Change the default password of an iBMC user.
RH8100 V3 Server
User Guide 7 Conguring the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 309