Huawei RH8100 V3 - Page 329

Figure 7-11 Boot information displayed for the LSISAS2208 controller card
The preceding information is for reference only. The actual information displayed may
dier.
● LSISAS3008 controller card
Press Ctrl-C to Start LSI Corp Conguration Utility... is displayed during the
system startup, as shown in Figure 7-12.
Figure 7-12 Boot information displayed for the LSISAS3008 controller card
The preceding information is for reference only. The actual information displayed may
dier.
● LSISAS3108 controller card
Press <Ctrl><R> to Run MegaRAID Conguration Utility is displayed during
system startup, as shown in Figure 7-13.
Figure 7-13 Boot information displayed for the LSISAS3108 controller card
RH8100 V3 Server
User Guide 7 Conguring the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 319