Huawei RH8100 V3 - Page 337

Figure 7-20 Setting Memory Migration
Step 2 Choose IntelRCSetup > Memory RAS Conguration, and set Migration Trigger
Mode to Manu or Auto based on site requirements. See Figure 7-21.
● If Migration Trigger Mode is set to Manu, an alarm is reported to the iBMC
to alert the user to migrate data to a spare memory board when the number
of correctable errors in a DIMM on a memory board has reached the
threshold.
● If Migration Trigger Mode is set to Auto, the system automatically migrates
data from the faulty memory board to a spare one when the number of
correctable errors in a DIMM on the faulty memory board has reached the
threshold.
RH8100 V3 Server
User Guide 7 Conguring the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 327