Huawei RH8100 V3 - Page 343

Figure 7-26 Boot
● In RH8100 V3 single-system mode, PXE1 Conguration and PXE2 Conguration are
respectively available for Port 1 and Port 2 in HFC-2, and PXE3 Conguration and PXE4
Conguration are respectively available for Port 1 and Port 2 in HFC-1. Other ports
cannot be congured with PXE.
● In RH8100 V3 dual-system mode, PXE1
Conguration and PXE2 Conguration in
system A are respectively available for Port 1 and Port 2 in HFC-2, and PXE3
Conguration and PXE4 Conguration in system B are respectively available for Port 1
and Port 2 in HFC-1. Other ports cannot be congured with PXE.
Step 2 Select PXE1 Conguration or PXE2 Conguration and press Enter.
Step 3 Choose Enable from the shortcut menu and press Enter to enable the PXE
function for the specied network port.
----End
Select BEV as a Boot Option
Step 1 Select a boot option, and press + or - to change the order of the boot option.
Select BEV as a boot option.
The one at the top of the boot option list is the
rst boot option, and the one at
the bottom is the last boot option.
● To move a boot option up, press +.
● To move a boot option down, press -.
Step 2 Press F10.
The Save conguration and exit? dialog box appears.
RH8100 V3 Server
User Guide 7 Conguring the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 333