Huawei RH8100 V3 - Page 354

Table 7-8 Hard partitioning parameters
Parameter Description
Set FusionPar Congures the RH8100 V3 as a single system or dual
independent systems. If the RH8100 V3 has only one
RAID controller card, it cannot operate in dual-system.
If the RH8100 V3 is in dual-system, you cannot use
iBMC of system B to congure hard partitions.
When the RH8100 V3 switches from the dual-system to
the single-system, the management network port in
system B has no IP address, and the password of the
root user is restored to the default password on the
product nameplate. When the RH8100 V3 switches from
the single-system to the dual-system, the IP address of
the management network port in system B is restored
to 192.168.2.101.
NOTE
● If the RH8100 V3 is in single-system and the OS is powered
on, the switching from the single-system to the dual-system
will fail.
● If the RH8100 V3 is in dual-system and the OS of system A
or B is powered on, the switching from the dual-system to
the single-system will fail.
Value: Single system or Dual- system
Setting method: Click an option button, and enter the
user name and password for system B. Note that this
user must have administrator rights.
RH8100 V3 Server
User Guide 7 Conguring the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 344