Huawei RH8100 V3 - Page 36

Sym
bol
Meaning Color Single-System Mode Dual-System Mode
Secondary
power
button/
indicator
Yello
w and
green
This indicator is
unavailable and o,
and this button is
unavailable.
● O: System B is not
powered on.
● Blinking yellow: iBMC
in system B is starting.
● Steady yellow: The
service system in
system B will be
powered on.
● Steady green: The
service system in
system B is powered
on properly.
NOTE
● When system B is
powered on, you can
press this button to
shut down the OS.
● When system B is
powered on, you can
hold down this button
for 6 seconds to power
o system B.
● When system B is ready
to be powered on, you
can press this button to
start system B.
Primary
UID
button/
indicator
Blue This button/indicator
helps identify and
locate a server in a
cabinet. You can turn
on or o the UID
indicator by manually
pressing the UID button
or remotely running a
command on the iBMC
CLI.
●
O: The server is not
located.
● Steady on: The
server is located.
NOTE
To reset iBMC, hold down
the UID button for 4 to 6
seconds.
This button/indicator
helps identify and locate
system A in a cabinet.
You can turn on or o
the UID indicator by
manually pressing the
UID button or remotely
running a command on
the iBMC CLI.
●
O: System A is not
located.
● Steady on: System A is
located.
NOTE
To reset iBMC in system A,
hold down the UID button
for 4 to 6 seconds.
RH8100 V3 Server
User Guide 2 About the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 26