Huawei RH8100 V3 - Page 41

Table 2-13 describes the indicators and buttons on the RH8100 V3 rear panel.
Table 2-13 Indicators and buttons on the rear panel
Sym
bol
Meaning Color Single-System Mode Dual-System Mode
Primary UID
indicator
Blue This indicator helps
identify and locate a
server in a cabinet. You
can turn on or o the
UID indicator by
manually pressing the
UID button or
remotely running a
command on the iBMC
CLI.
●
O: The server is
not located.
● Steady on: The
server is located.
This indicator helps
identify and locate
system A in a
cabinet. You can
turn on or o the
UID indicator by
manually pressing
the UID button or
remotely running a
command on the
iBMC CLI.
●
O: System A is
not located.
● Steady on:
System A is
located.
Secondary
UID
indicator
Blue This indicator is
unavailable and o.
This indicator helps
identify and locate
system B in a
cabinet. You can
turn on or o the
UID indicator by
manually pressing
the UID button or
remotely running a
command on the
iBMC CLI.
●
O: System B is
not located.
● Steady on:
System B is
located.
- Data
transmissio
n status
indicator for
the
manageme
nt network
port
Orange ● O: No data is
being transmitted.
● Blinking orange:
Data is being
transmitted.
● O: No data is
being
transmitted.
● Blinking orange:
Data is being
transmitted.
RH8100 V3 Server
User Guide 2 About the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 31