Huawei RH8100 V3 - Page 43

Sym
bol
Meaning Color Single-System Mode Dual-System Mode
Fan status
indicator
Red and
green
● O: The server is
not powered on.
● Blinking red at 0.5
Hz: An alarm is
generated for the
server, and repair
need is uncertain.
● Steady red: A fan
module or the
board to which a
fan module is
connected is faulty
and needs to be
repaired.
● Steady green: The
fan module is faulty
or is in the online
upgrade state. (An
online upgrade
takes about 3
minutes. If the
indicator is steady
green for a long
time, the upgrade
fails.)
● Blinking green at
0.5 Hz: The fan
module is properly
communicating
with the iBMC.
● Blinking green at 4
Hz: The fan module
fails to
communicate with
the iBMC.
●
O: The server is
not powered on.
● Blinking red at
0.5 Hz: An alarm
is generated for
the server, and
repair need is
uncertain.
● Steady red: A fan
module or the
board to which a
fan module is
connected is
faulty and needs
to be repaired.
● Steady green: The
fan module is
faulty or is in the
online upgrade
state. (An online
upgrade takes
about 3 minutes.
If the indicator is
steady green for
a long time, the
upgrade fails.)
● Blinking green at
0.5 Hz: The server
is properly
communicating
with the iBMC.
● Blinking green at
4 Hz: The fan
module fails to
communicate
with the iBMC.
RH8100 V3 Server
User Guide 2 About the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 33