Huawei RH8100 V3 - Page 45

Sym
bol
Meaning Color Single-System Mode Dual-System Mode
PCIe card
hot swap
button
– You can hot-swap the
PCIe card when the
system is operating
properly.
● Press this button
when the PCIe card
is operating
properly. If the PWR
indicator is
o 10
seconds later,
remove the PCIe
card.
● Press this button
after installing the
PCIe card. If the
PWR indicator is
steady green 10
seconds later, the
PCIe card is
operating properly.
You can hot-swap
the PCIe card when
the system is
operating properly.
● Press this button
when the PCIe
card is operating
properly. If the
PWR indicator is
o 10 seconds
later, remove the
PCIe card.
● Press this button
after installing
the PCIe card. If
the PWR
indicator is
steady green 10
seconds later, the
PCIe card is
operating
properly.
Figure 2-12 shows the indicators and button on an RH8100 V3 memory board
and compute module. Table 2-14 describes the indicators and button.
RH8100 V3 Server
User Guide 2 About the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 35