Huawei RRU - Page 37

RRU
Hardware Maintenance Guide
4 Replacing an RRU
Issue 16 (2015-03-23)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
30
Figure 4-20 Installing the blade RRU on the general RRU main bracket (conversion bracket
reused)
− Method 2: The conversion bracket is not reused.
Directly install the blade RRU on the general RRU main bracket, as shown in Figure
4-21.
Figure 4-21 Installing the blade RRU on the general RRU main bracket (conversion
bracket not reused)

Replace the RRUs at the two sides.