Huawei SmartAX MT800 ADSL CPE - Chapter 3 Before Configuring MT800; 3.1 The Reason of Configuration

User Manual
SmartAX MT800 ADSL CPE
Chapter 3 Before Configuring MT800
3-1
Chapter 3 Before Configuring MT800
To configure MT800, you have to connect MT800 to a computer
as shown below. Use the provided straight-through cable.
10/100 Base-TX
(straight-through)
10/100 Base-TX Cable
(straight-through wires)
10/100 Base-TX
(straight-through)
10/100 Base-TX Cable
(straight-through wires)
Figure 3-1 Computer to MT800 Connection
3.1 The Reason of Configuration
The factory default settings of MT800 had optimized all
functions and make it can operate in most conditions of network.
Usually, for the users with simple network topology, the default
setting values can meet their basic requirements and need no
change.