User Manual
SmartAX MT800 ADSL CPE
Chapter 4 Web-based Management
4-14
include: directly provide DHCP service, receive and relay DHCP
service.
Figure 4-10 DHCP Mode Configuration
The illustration of this page as below:
DHCP Server
MT800 can be configured as DHCP server of LAN Then, the ADSL
terminal shall provide IP settings for you PC.
DHCP Relay
MT800 can also to be configured to relay DHCP packets, and the
you PC shall be assigned IP address automatically.
None
The default setting is None, which disable DHCP services. In this
case, ADSL terminal device shall be assigned IP settings manually
or receive from the DHCP server of LAN or ISP.
4.7 DNS Configuration
Click the DNS of Advanced Functions in the Wizard Column to
set the DNS. Multiple DNS addresses are useful to provide
alternatives when one of the servers is down or encountering heavy
traffic. ISPs typically provide primary and secondary DNS addresses,
and may provide additional addresses.
To Next Page
Loading...
