Huawei SmartAX MT800 - Checking for Proxy Service; Applying the LAN IP Address of MT800; Inputting the User Name and Password

11
3.4.1 Checking for Proxy Service
If the browser software on the computer is configured to use a
proxy server for Internet access, it is necessary to first disable the
proxy connection.
In Windows Internet Explorer, you can check whether a proxy
server is enabled using the following procedures:
1) In the Explorer Window, select and click on
ToolsÆ
ÆÆ
ÆInternet Options, and enter the Internet Options
window.
2) In the Internet Options window, click the Connections
tab and click on the LAN Settings button.
3) Verify that the “Use proxy server” option is NOT checked. If
it is checked, click in the checked box to deselect the
option and click OK.
3.4.2 Applying the LAN IP Address of MT800
To access the Web-based configuration manager, launch your
Web browser and enter the LAN IP address of the MT800. For the
first access, the default LAN IP address of the MT800 is used. Type
in “http://” followed by the default IP address, “192.168.1.1” in the
address bar of the browser. The URL in the address bar should read:
http://192.168.1.1.
3.4.3 Inputting the User Name and Password
A new window appears prompting you for a user name and
password needed to access the Web-based configuration manager.