Huawei SmartAX MT800 - 4.14 QoS

59
When you are done selecting criteria, ensure that the Enable
button is selected at the top of the page, and then click the Submit
button at the bottom of the page. After a confirmation page displays,
the IP Filter -Configuration page will redisplay with the new rule
showing in the table.
III.
Save
z
Click the Submit button to save the settings in the RAM.
z
To save these configuration changes permanently, enter
the Save & Reboot page, select Save and click Submit
button to save new settings.
4.14 QoS
Various applications that operated in MT800 have different
requirement of priority level. Different applications will be classified
by MT800 according to the different requirement of priority level, and
the different priority level will be provided to each level with mode of
Diffserv. MT800 sets the individual queue for each priority level, and
then controls the output of each queue of priority.
Click the QoS of Advanced Function in the Wizard Column to
set the priority level to the applications that operated in MT800.
The available options of QoS include: Application, TOS, Diffserv,
802.1p, and VLAN Tag.