Huawei SUN2000-150KTL-S0 - A How Do I Prepare the Webui Operating Environment

PowerCube 5000 (SUN2000-150KTL-S0)
Installation Guide
A How Do I Prepare the WebUI Operating Environment?
Issue 03 (2020-04-10)
Copyright © Huawei Technologies Co., Ltd.
88
A How Do I Prepare the WebUI Operating
Environment?
Before logging in to the WebUI, you need to prepare the WebUI operating environment to
connect to the monitoring unit.
Operating Environment
Supported operating system: Windows XP or later
Browser: Internet Explorer 8.0 or later, FireFox 13 or later, and Chrome 20
Internet Explorer is used as an example to illustrate all WebUI operations mentioned in this document.
Setting a LAN
If the monitoring unit is connected to a LAN and a proxy server has been selected, cancel the
proxy server settings.
If the monitoring unit is connected to the Internet but your computer is connected to a LAN,
do not cancel the proxy server settings. Otherwise, you cannot access the SMU.
To cancel proxy server settings, perform the following steps:
1. Open Internet Explorer.
2. Choose Tools > Internet Options.
3. Choose Connections tab, click LAN Settings.
4. Clear Use a proxy server for your LAN.
Canceling proxy server settings