Replacing SUN2000-(15KTL-50KTL) Series with
SUN2000-(15KTL-50KTL)-M3 Series
User Manual
Copyright © Huawei Technologies Co., Ltd.
Do not connect loads between the SUN2000 and the AC switch.
Use a socket wrench and extension rod to connect the AC power cable. The extension rod
must be longer than 100 mm.
Do not install third-party devices in the AC connection box.
Procedure
Step 1 Remove the AC terminal box and install partition boards.
Figure 6-2 Removing the AC terminal box
Step 2 Route the AC power cable through the AC connection box.
To Next Page
Loading...
