45
If the original SUN2000 uses the FE communication mode, you need to install the WLAN-FE
Smart Dongle for the SUN2000 connected to the monitoring device after the replacement. Use
the RS485 communication mode for other SUN2000s.
Networking Diagram Before the Replacement
Networking Diagram After the Replacement
7
(Optional) Installing the WLAN-FE Smart Dongle
Click
Pull the DC input power cables back to
ensure that they are connected securely.
Extension cables for DC terminals
If the original DC input power cables are not long enough, use the DC input extension cables
delivered with the package.
To Next Page
Loading...
