Huawei SUN2000-17KTL - Page 47

46
1. Install the WLAN-FE Smart Dongle.
Smart Dongle port
(4G/WLAN-FE)
Quick Guide
No.
Acceptance Criteria
1
The SUN2000 is installed correctly and securely.
2
Cables are routed properly as required by the customer.
3
The communications expansion module is installed correctly and securely.
4
Cable ties are secured evenly and no burr exists.
5
The PE cable is connected correctly, securely, and reliably.
6
The DC switch and all the switches connected to the SUN2000 are set to OFF.
7
The AC output power cable, DC input power cables, and signal cables are connected
correctly and securely.
8
Unused terminals and ports are locked by watertight caps.
9
The installation space is proper, and the installation environment is clean and tidy.
8
Verifying the Installation

The WLAN-FE Smart Dongle is not provided in standard configuration.

Install the network cable before installing the Smart Dongle on the SUN2000.

For details about how to use the WLAN-FE Smart Dongle SDongleA-05, see the SDongleA-
05 Quick Guide (WLAN-FE).

The quick guide is delivered with the Smart Dongle. You can also scan the QR code to
obtain the document.