SUN2000-(50KTL-JPM0, 50KTL-JPM1, 63KTL-JPM0)
User Manual
Copyright © Huawei Technologies Co., Ltd.
Figure 4-10 Drilling a hole
Step 3 Align the mounting bracket holes with the drilled holes, insert bolt assemblies (flat washers,
spring washers, and M12x40 bolts) into the holes through the mounting bracket, and secure
them using the supplied stainless steel nuts and flat washers.
M12x40 bolt assemblies are provided with the SUN2000. If the bolt length does not meet the installation
requirements, prepare M12 bolt assemblies by yourself and use them together with the provided M12
nuts.
To Next Page
Loading...
