Huawei SUN2000-50KTL-JPM0 - Page 91

SUN2000-(50KTL-JPM0, 50KTL-JPM1, 63KTL-JPM0)
User Manual
7 Man-Machine Interactions
Issue 01 (2018-09-30)
Copyright © Huawei Technologies Co., Ltd.
85
Figure 7-8 Power adjustment parameters (special user)
----End
Parameter List
Table 7-5 Parameter description
No.
Parameter
Description
Unit
Value Range
Remarks
1
Remote
power
schedule
If this parameter is set to
Enable, the SUN2000
responds to the remote
power scheduling
instruction. If this
parameter is set to
Disable, the SUN2000
does not respond to the
remote power scheduling
instruction.
N/A

Disable

Enable
N/A
2
Schedule
instruction
valid duration
Specifies the duration
within which the
scheduling instruction is
valid.
s
[0, 86400]
If the value is less
than 60 seconds, the
scheduling
instruction is valid
permanently.