Huawei SUN2000-60KTL-M0 - Page 107

Parameter List
Table 7-5 Parameter description
No. Parameter Description Remarks
1 Remote power
schedule
If this parameter is set to Enable,
the SUN2000 responds to the
remote power scheduling
instruction. If this parameter is set
to Disable, the SUN2000 does not
respond to the remote power
scheduling instruction.
N/A
2 Schedule
instruction valid
duration
Species the duration within
which the scheduling instruction is
valid.
If the value is less than 60
seconds, the scheduling
instruction is valid
permanently.
3 Maximum active
power
Species the output upper
threshold for the maximum active
power to adapt to various market
requirements.
Pmax_limit is the upper
limit of the maximum active
power.
4 Shutdown at 0%
power limit
If this parameter is set to Enable,
the SUN2000 shuts down after
receiving the 0% power limit
command. If this parameter is set
to Disable, the SUN2000 does not
shut down after receiving the 0%
power limit command.
N/A
5 Active power
change gradient
Adjusts the change speed of the
SUN2000 active power.
Adjust the active power
based on the percentage of
the rated apparent power.
6 Fixed active power
derated
Adjusts the active power output
of the SUN2000 to a xed value.
Pmax_limit is the upper
limit of the maximum active
power.
7 Active power
percentage
derating
Adjusts the active power output
of the SUN2000 to a percentage.
If this parameter is set to
100, the SUN2000 delivers
power output based on the
maximum output power.
8 Power factor Adjusts the SUN2000 power
factor.
N/A
9 Reactive power
compensation
(Q/S)
Adjusts the SUN2000 output
reactive power. N/A
SUN2000-(50KTL, 60KTL, 65KTL)-M0
User Manual 7 Man-Machine Interactions
Issue 11 (2024-02-02) Copyright © Huawei Technologies Co., Ltd. 99