Figure 5-20 Removing a power cable
Step 6 Press the latch on the PSU in the arrow direction, and pull the PSU out of the slot
by holding the handle. See Figure 5-21.
Figure 5-21 Removing a PSU
Step 7 Place the removed PSU in an ESD bag.
Step 8 If a new PSU is not installed immediately, install a PSU
ller. See Figure 5-22.
TaiShan 200 Server
Maintenance and Service Guide (Model 2280) 5 Removal and Installation
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 93
To Next Page
Loading...
