5.8 Chassis Cover
Removing the Chassis Cover
Step 1 Wear an ESD wrist strap. For details, see 5.2 ESD Protection.
Step 2 Power
o the server. For details, see 5.4.2 Powering O the Server.
Step 3 Remove the power cables. For details, see 5.7 PSU.
Step 4 Remove the server. For details, see 5.4.4 Removing the Server and Guide Rails.
Step 5 Loosen the handle screw of the cover using a Phillips screwdriver. See (1) in
Figure 5-33.
Figure 5-33 Removing the chassis cover
Step 6 Pull out the handle to push the chassis cover backwards. See (2) in Figure 5-33.
Step 7 Lift the chassis cover. See (3) in Figure 5-33.
----End
TaiShan 200 Server
Maintenance and Service Guide (Model 2280) 5 Removal and Installation
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 101
To Next Page
Loading...
