Huawei TaiShan 200 2280 - Page 127

Figure 5-56 Installing a ller panel
Step 11 Install the riser module. For details, see 5.11 Riser Module.
----End
Installing a PCIe Card on a Riser Module
Step 1 Wear an ESD wrist strap. For details, see 5.2 ESD Protection.
Step 2 Power
o the server. For details, see 5.4.2 Powering O the Server.
Step 3 Remove the power cables. For details, see 5.7 PSU.
Step 4 Remove the server. For details, see 5.4.4 Removing the Server and Guide Rails.
Step 5 Remove the chassis cover. For details, see 5.8 Chassis Cover.
Step 6 Remove the riser module where the PCIe card is to be installed. For details, see
5.11 Riser Module.
Step 7 Remove the PCIe card
ller panel from the riser module. See Figure 5-57.
Figure 5-57 Removing a PCIe card ller panel
TaiShan 200 Server
Maintenance and Service Guide (Model 2280) 5 Removal and Installation
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 120