Step 3 Remove the power cables. For details, see 5.7 PSU.
Step 4 Remove the server. For details, see 5.4.4 Removing the Server and Guide Rails.
Step 5 Remove the chassis cover. For details, see 5.8 Chassis Cover.
Step 6 Remove the cable of the supercapacitor from the RAID controller card. See Figure
5-65.
Figure 5-65 Removing the supercapacitor cable
Step 7 Press the latch and remove the supercapacitor tray out of the air duct. See Figure
5-66.
TaiShan 200 Server
Maintenance and Service Guide (Model 2280) 5 Removal and Installation
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 128
To Next Page
Loading...
